The Best Foul Poles Series I’ve Found!
Your foul pole purchase will be dictated by your budget & size of your ballfield.
I have added the 3 most popular sizes and configurations here.
These rust-resistant galvanized steel baseball foul poles are found all over the US High School & College ballfields and can be purchased either without ground sleeves (these are galvanized steel tubes for those wanting the ability to occasionally remove their foul poles so only the sleeves get concreted in place).
Our foul poles feature heavy powder-coated hi-viz optic yellow powder-coated finishes, including on the 18-inch wide framed & stamped steel mesh wings. I like the steel mesh wings over the fabric mesh models… steel just has to last longer with less maintenance!
About Pole Ground Sleeves
This in-ground pole series also gives you the option of adding ground sleeves.
These metal sleeves can easily handle our 12 ft, 15 ft. & 20 ft. tall models. (size measured as above-ground finished height.)
You set these galvanized steel cylinder “sleeves” in a pre-dug hole & cement into place.
This keeps your foul pole set standing straight with years of maintenance & also allows you to optionally remove the poles if that becomes a need.
- 12 Ft. Pole Ground Sleeves are 36″ long
- 15 Ft. Pole Ground Sleeves are 36″ long
- 20 Ft. Pole Ground Sleeves are 48″ long
Note: Our poles & matching ground sleeves are sold & priced as a set of 2. Diameter refers to the outside diameter (OD) of the steel pipe.
Let us know if you need a size you do not see here. We can help.
You cannot buy more for less investment.
I hope this helps you to make a good buying decision!
Baseball Foul Pole Specs
- 12′, 15′, 20′, and 30′ Heights After Installation
- 3 1/2″ O.D. Heavy Wall Galvanized Steel
- 18″ W Steel Mesh Wings For Easily identifying Foul Balls
- Rustproof Powder Coated Steel Surfaces | Optic Yellow