Welcome, Guest!
My Cart: Empty
Recent posts
Most Views

Heavy Duty Permanent Batting Cage Frames - Our best!

  • Tough 12 gauge galvanized steel – 2” square
  • 16' wide frame fits any 12’ or 14’ wide net
  • Includes winch & cable system – just crank tight
In Stock

Price as configured: $0.00

  • A Very Tough Rustproof Galvanized Steel Batting Cage Frame
  • Ships Complete By Truck – Click Here To Add Any Of Our Batting Cages
  • Only 3 Sections Fit Up To 55’ Batting Cage Nets 
  • Only 4 Sections Fit Up To 70’ Batting Cage Nets


A Batting Cage Frame For Team & Commercial Use

Batting Cage Winch

It’s a traditional shape, in-ground batting cage frame made from 2 inch square galvanized steel. The unique square shape adds rigidity especially with its hi-grade 12 gauge galvanized steel tubing frames. The finish won’t chip or flake or rust.

Each frame section is 16 ft wide and pre drilled to fit standard 12 or 14 ft wide batting cage nets (aka batting cage tunnels). To use any 12 ft wide batting cage net or tunnel, you will just need to drill 2 holes per frame section.

Frame Sections are 16’ W & 12’ H when installed
(net hangs from 11’ leaving enough of your 12' h net on the ground).

Each Batting Cage Frame Section Includes:

  •  2 Upright Poles (the legs)
  •  1 Cross Member (the ceiling)
  •  2 Ground Sleeves (you will concrete these)
  •  1 Ratchet Winch (to easily tighten your net system from ground level!)
  •  All cabling, clamps, eyebolts, turnbuckles & snap rings (carabineers)





What JP Says about the Heavy Duty Permanent Batting Cage Frames - Our best!

A Commercial Team Batting Cage Frame For Those Who Need It!

Buy this frame series in 3 sections for any 55' batting cage net and 4 sections to hang any 70 ft batting cage net. Frame sections can be spaced to fit your cage net and space requirements. Fits popular 12 ft wide & more popular 14 ft wide batting cage nets.

Batting Cage Nets Stay Tight With No Sag!

The unique serpentine cable system makes it really easy of hanging and take-down cage nets. The cable feeds back & forth across the top of the frame cross members and attaches to a manual ratchet/winch. No need to climb ladders just to tighten or remove the net!  Frame dimensions after installation are approx. 11' high x 16' wide. Frames are pre-drilled for 14' wide nets. 12’ wide nets must be re-drilled on site (no big deal).

Once again, good and cheap don’t go together but if you are a heavy user, I would look strongly at this commercial and team series!

Ships to you by motor freight. Click the buy button to see your total ship costs (it’s surprisingly low). Remember, cage nets are sold separately and ours are top quality! 

Additional Information

In Stock

From: $1,299.00

To: $1,599.00

Recent posts
Most Views